Stainless Steel 316H Seamless Pipes & Tubes Manufacturer & Supplier

SS 316H (UNS S31609) is the high-carbon version of 316, with carbon controlled to 0.04-0.10%. It combines the molybdenum-enhanced corrosion resistance of 316 with superior creep strength at elevated temperatures (425-816C). This makes it the preferred choice for high-temperature service in corrosive environments where both properties are essential.

UNS: S31609 | Category: Austenitic Stainless Steel | Werkstoff Nr: 1.4919 | EN Name: X6CrNiMoTi17-12-2

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 160, XXS

Chemical Composition (%)

CMnSiCrNiMoPS
0.04-0.102.00 max0.75 max16.0-18.010.0-14.02.0-3.00.045 max0.030 max

Mechanical Properties

Tensile Strength
515 MPa min
Yield Strength
205 MPa min
Elongation
35% min
Hardness
95 HRB max

Physical Properties

Density
7.98 g/cm3
Melting Range
1375-1400 C
Thermal Conductivity
16.3 W/m-K
Electrical Resistivity
740 nOhm-m
Specific Heat
500 J/kg-K
Coeff. of Thermal Expansion
15.9 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
~24
Max Service Temp (Oxidizing)
870 C (continuous)
Intergranular Corrosion
Susceptible if sensitized (higher carbon)
Stress Corrosion Cracking
Better than 304H in chlorides
General Corrosion Rate
<0.05 mm/yr in most acids
Seawater Resistance
Moderate - better than 304

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
TP316H
JIS
SUS 316HTB
BS
316S51
GOST
08Kh17N13M2T

Frequently Asked Questions

What is the chemical composition of SS 316H?

SS 316H contains C 0.04-0.10, Mn 2.00 max, Si 0.75 max, Cr 16.0-18.0, Ni 10.0-14.0, Mo 2.0-3.0, P 0.045 max, S 0.030 max (weight %).

What are the mechanical properties of SS 316H?

Tensile Strength: 515 MPa min; Yield Strength: 205 MPa min; Elongation: 35% min; Hardness: 95 HRB max.

What are the equivalent grades of SS 316H?

Nearest equivalents of SS 316H: TP316H (ASTM), SUS 316HTB (JIS), 316S51 (BS), 08Kh17N13M2T (GOST). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Forgings supply SS 316H to?

SS 316H is supplied to ASTM A312 / ASME SA312, ASTM A213 / ASME SA213, ASTM A269 and DIN EN 10216-5.

What sizes of SS 316H are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is SS 316H used for?

SS 316H is used for High-temperature service (425-816C) in corrosive environments, Power plant superheater tubes with chloride exposure, Petrochemical furnace tubes with acid contact, Refinery heater tubes requiring Mo for corrosion, Chemical plant heat exchangers at elevated temps and Boiler tubes in marine/offshore environments.