Duplex Stainless Steel S31803 Seamless Pipes & Tubes Manufacturer & Supplier

Duplex S31803 is the earlier designation that overlaps with S32205. S31803 has a slightly wider composition range and may have a lower minimum PREN than S32205. Many existing specifications still reference S31803, though S32205 is now the preferred designation for new projects.

UNS: S31803 | Category: Duplex Stainless Steel | Werkstoff Nr: 1.4462 | EN Name: X2CrNiMoN22-5-3

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 160

Chemical Composition (%)

CMnSiCrNiMoNPS
0.030 max2.00 max1.00 max21.0-23.04.5-6.52.5-3.50.08-0.200.030 max0.020 max

Mechanical Properties

Tensile Strength
620 MPa min
Yield Strength
450 MPa min
Elongation
25% min
Hardness
293 HBW max

Physical Properties

Density
7.82 g/cm3
Melting Range
1350-1400 C
Thermal Conductivity
19 W/m-K
Electrical Resistivity
850 nOhm-m
Specific Heat
480 J/kg-K
Coeff. of Thermal Expansion
13.0 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
~33
Max Service Temp (Oxidizing)
315 C
Intergranular Corrosion
Highly resistant
Stress Corrosion Cracking
Excellent resistance
General Corrosion Rate
<0.02 mm/yr in most environments
Seawater Resistance
Excellent up to 20C

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
S31803
NORSOK
MDS D45
Trade
2205/S31803

Frequently Asked Questions

What is the chemical composition of Duplex S31803?

Duplex S31803 contains C 0.030 max, Mn 2.00 max, Si 1.00 max, Cr 21.0-23.0, Ni 4.5-6.5, Mo 2.5-3.5, N 0.08-0.20, P 0.030 max, S 0.020 max (weight %).

What are the mechanical properties of Duplex S31803?

Tensile Strength: 620 MPa min; Yield Strength: 450 MPa min; Elongation: 25% min; Hardness: 293 HBW max.

What are the equivalent grades of Duplex S31803?

Nearest equivalents of Duplex S31803: S31803 (ASTM), MDS D45 (NORSOK), 2205/S31803 (Trade). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Forgings supply Duplex S31803 to?

Duplex S31803 is supplied to ASTM A789 / ASME SA789, ASTM A790 / ASME SA790, NORSOK MDS D45 and DIN EN 10216-5.

What sizes of Duplex S31803 are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is Duplex S31803 used for?

Duplex S31803 is used for Process piping in chemical plants, Oil & gas production tubing, Heat exchangers, Pressure vessels, Structural applications and Transport tankers for chemicals.