Inconel 600 (UNS N06600) Seamless Pipes & Tubes Manufacturer & Supplier
Alloy 600 (Inconel 600, UNS N06600) is a nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress corrosion cracking. It is widely used in the nuclear industry, chemical processing, and for components that must resist caustic environments.
UNS: N06600 | Category: Nickel Alloy | Werkstoff Nr: 2.4816 | EN Name: NiCr15Fe
Size Range
Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)
Wall Thickness: SCH 5S to SCH 80S
Chemical Composition (%)
| Ni | Cr | Fe | C | Mn | Si | Cu | S |
|---|---|---|---|---|---|---|---|
| 72.0 min | 14.0-17.0 | 6.0-10.0 | 0.15 max | 1.00 max | 0.50 max | 0.50 max | 0.015 max |
Mechanical Properties
- Tensile Strength
- 550 MPa min
- Yield Strength
- 240 MPa min
- Elongation
- 30% min
- Hardness
- 90 HRB max
Physical Properties
- Density
- 8.47 g/cm3
- Melting Range
- 1354-1413 C
- Thermal Conductivity
- 14.8 W/m-K
- Electrical Resistivity
- 1030 nOhm-m
- Specific Heat
- 444 J/kg-K
- Coeff. of Thermal Expansion
- 13.3 um/m-C
Corrosion Resistance
- Pitting Resistance (PREN)
- N/A (Ni alloy)
- Max Service Temp (Oxidizing)
- 1175 C
- Intergranular Corrosion
- Good when solution annealed
- Stress Corrosion Cracking
- Excellent resistance in caustic
- General Corrosion Rate
- Excellent in alkaline environments
- Seawater Resistance
- Good
Applicable Standards
- ASTM B167 / ASME SB167
- ASTM B163 / ASME SB163
- ASTM B516 / ASME SB516
- DIN 17751
Applications
- Nuclear reactor components
- Chemical and food processing
- Furnace components and heat treatment
- Caustic evaporators
- Aerospace and gas turbine components
- Electronic and thermocouple sheathing
- Semiconductor diffusion and CVD furnace tubes and heater sheaths
Industries Served
- Nuclear
- Chemical Processing
- Aerospace
- Electronics
- Heat Treatment
- Semiconductor & Electronics
Key Advantages
- Outstanding resistance to caustic corrosion
- Excellent high-temperature oxidation resistance to 1175C
- Immune to chloride SCC
- Good mechanical properties from cryogenic to elevated temperatures
- Nuclear industry approved
Equivalent Grades
- ASTM
- N06600
- Trade
- Inconel 600
- DIN
- 2.4816
Frequently Asked Questions
What is the chemical composition of Alloy 600?
Alloy 600 contains Ni 72.0 min, Cr 14.0-17.0, Fe 6.0-10.0, C 0.15 max, Mn 1.00 max, Si 0.50 max, Cu 0.50 max, S 0.015 max (weight %).
What are the mechanical properties of Alloy 600?
Tensile Strength: 550 MPa min; Yield Strength: 240 MPa min; Elongation: 30% min; Hardness: 90 HRB max.
What are the equivalent grades of Alloy 600?
Nearest equivalents of Alloy 600: N06600 (ASTM), Inconel 600 (Trade), 2.4816 (DIN). Equivalents are close matches, not identical; confirm against the governing standard.
Which standards does Stancor Forgings supply Alloy 600 to?
Alloy 600 is supplied to ASTM B167 / ASME SB167, ASTM B163 / ASME SB163, ASTM B516 / ASME SB516 and DIN 17751.
What sizes of Alloy 600 are available?
1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).
What is Alloy 600 used for?
Alloy 600 is used for Nuclear reactor components, Chemical and food processing, Furnace components and heat treatment, Caustic evaporators, Aerospace and gas turbine components and Electronic and thermocouple sheathing.